Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Multi Stg 5 Ton 60k BTU Coil 96Pct Low Nox Gas Furnace 100 MBH 15.5 SEER2 V1

Arcoaire AC Single Phase Split System Deluxe Multi Stg 5 Ton 60k BTU Coil 96Pct Low Nox Gas Furnace 100 MBH 15.5 SEER2 V1
Kit Includes Copper Fittings/Adapters, PVC Ptrap Kit, BIP Gas Cock, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, Electrical Box, Switch, Receptical & Duplex Cover, whip 6' 3/4" 8GA, No Vent Caps, Furnace Leveler, 2" Plastic Pad, 2H/2C Thermostat

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Multi Stg 5 Ton 60k BTU Coil 96Pct Low Nox Gas Furnace 100 MBH 15.5 SEER2 V1
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Heating Input (BTUH):
100 MBH Heat
Includes:
H4A7T60AKAWA, F96VTN1002122A, EVM4X60M24A, ACGKIT10
Nominal Capacity (BTUH):
60000
Cooling Efficiency (EER2):
11.5
Cooling Efficiency (SEER2):
15.5
System Indoor Type:
Gas Furnace
System Outdoor Type:
Multi Stage
System Coil Configuration:
Multi Position Power "V"
Furnace Efficiency:
96
System Nominal Tons:
5.0 Ton
AHRI System Number:
210715442
A/C, Single Phase, Split Gas Furnace Multi Stage, Multi Position Power "V" H4A7T/F96VTN/EVM4X

Air Conditioner Condenser
  • 2 Stage Copeland Scroll Ultratech Compressor
  • Welded Aluminum Tube / Aluminum Fin Coil
  • Improved Efficiency w/ Multi Directional Internal Enhancements
  • Less Sensitivity to Pressure Drop
  • Heat Shrink Wrap Protects Copper / Aluminum Joints
  • AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
  • Approximately 50% Lighter than Copper Coils
  • Filter Drier Supplied for Field Installation
  • Self Configuring Operation & Text Based Diagnostics w/ Ion Control
  • Compressor Sound Blanket & Isolation Grommets Factory Installed
  • Extended Service Valve to Accommodate Press Fittings
  • High & Low Pressure Switches
  • Outdoor Temp Sensor Factory Installed
  • Factory Charged w/ R410A Refrigerant
  • Long Line Set Capability (refer to spec sheet for details)
  • Low Ambient Cooling Capable w/ Optional Kit
  • Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
  • Corner Posts for Added Cabinet Strength
  • Coated Hail Guard Coil Protection
  • Post Painted (black) Coil
  • Coated Cabinet Screws
  • Internal Pressure Relief Valve & Thermal Overload

Gas Furnace

  • Two-stage heating operation
  • Two-speed induced draft combustion blower
  • Supports single- and two-stage cooling units
  • Dehumidification feature (A/C)
  • Fully insulated steel cabinet
  • Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressurized to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed)
  • VCT Variable Speed Constant Torque Motor
  • Aluminized steel RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • Direct ignition with Silicon Nitride ignitor
  • Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
  • 35” (889mm) high , for ease of installation
  • Four position - upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Self-configuring and communicating control
  • Concentric vent available
  • Twining Capable (select size) w/ kit

Evaporator Coil

  • Corrosion Resistant Aluminum
  • Low Pressure Drop
  • TXV metering device factory installed
  • Compact design, shorter than A-coils
  • Hemmed flanges for safer handling
  • Cabinets meet or exceed 2% air leakage codes
  • UV knockout
  • No delta plate allows easy cleaning
  • 30-40% Lighter than “A” Coils
  • 80% Fewer Factory Braze Joints vs. “N” Coils
  • V Design Reduces Cabinet Sweating
  • Helium leak tested @ the factory